Why is it difficult to open and close my HunterDouglas Indoor Furnishing?
If the fabric of your HunterDouglas Indoor Furnishing doesn't traverse easily, tilt the vanes to the fully opened position before traversing. Check that the installation brackets are level, their front edges are aligned, and there are no obstructions to the movement of the fabric, such as the cord being caught in the brackets.
What to do if the panels don’t meet in the centre on HunterDouglas Indoor Furnishing?
If the two fabric panels on your HunterDouglas Indoor Furnishing don’t quite meet in the center (and the gap is within 1/4"), you can cup them with clean hands and round them along the length of the fabric to help them meet.
Why the end treatment arm does not swing around the end cap on HunterDouglas Indoor Furnishing?
If the end treatment arm on your HunterDouglas Indoor Furnishing does not swing around the end cap, and you have an inside mount, check for clearance between the end of the headrail and the window casement. Refer to “Install the SofTrak™ Headrail” on page 12.
What to do if a vane is not aligned on my HunterDouglas Indoor Furnishing?
If a vane is not aligned on your HunterDouglas Indoor Furnishing, make sure that the vane is completely inserted into the clip. See “Pose des lames sur les agrafes” on page 15.
What to do if a vane does not hang vertically on my HunterDouglas Indoor Furnishing?
To correct a vane that isn't hanging vertically on your HunterDouglas Indoor Furnishing, ensure the sheer is fully closed. Check for any obstructions hindering the vane's movement. You might also want to replace any protruding window cranks with T-cranks.
What to do if the fabric end treatment does not hang straight on HunterDouglas Indoor Furnishing?
If the fabric end treatment on your HunterDouglas Indoor Furnishing does not hang straight, separate the hook and loop strips. Then, reposition the end treatment on the swivel plate. Repeat this process until the end treatment hangs straight. See “Attach the End Treatment to the Swivel Plate” on page 17 for more guidance.
Why do the vanes not rotate or rotate incorrectly on my HunterDouglas Indoor Furnishing?
If the vanes on your HunterDouglas Indoor Furnishing do not rotate or rotate incorrectly, check that the fabric is fully traversed. Also, make sure there are no obstructions preventing the vanes from moving. Consider replacing any protruding window cranks with T-cranks.
What to do if a vane does not hang correctly on my HunterDouglas Indoor Furnishing?
If a vane on your HunterDouglas Indoor Furnishing isn't hanging correctly, check that it is completely inserted into the pinion clip. Refer to “Attach the Vanes to the Pinion Clips” on page 15 for detailed instructions.
What to do if a vane is out of alignment on HunterDouglas Indoor Furnishing?
To fix a vane that is out of alignment on your HunterDouglas Indoor Furnishing, use the wand to rotate the vanes completely to one side, and then completely to the other side. The vanes should automatically realign. You can also manually turn the pinion clip to align it with the others.
Overview of the Luminette Privacy Sheers and PowerView Motorization components.
Lists essential tools and fasteners for installation, differentiating provided and user-supplied items.
Provides instructions on how to safely unpack the window fashion components and handle the fabric.
Defines different mounting methods and terminology for clarity in the installation process.
Detailed steps for installing mounting brackets for inside or ceiling installations.
Details how to measure and mark the mounting surface for correct installation bracket placement.
Instructions for installing mounting brackets for outside window or door openings.
Explains how to use spacer blocks and extension brackets to add clearance for mounting.
Guides on measuring and marking for bracket placement in outside mount installations.
Instructions for drilling holes and attaching spacer blocks or extension brackets to the mounting surface.
Guidance on using shims to ensure brackets are level and properly aligned during installation.
Specific instructions for mounting brackets on corner or bay window configurations.
Steps to correctly install the SofTrak headrail into the mounted brackets for secure operation.
Details on configuring simulated split stack systems for side-by-side fabric stacking.
Instructions for connecting the motor assembly and other PowerView components.
Guide to connecting the DC power supply to the motor assembly and testing operation.
Procedures for testing the headrail's movement and travel limits after installation.
Steps for attaching the fabric vanes to the headrail's pinion clips.
Instructions for attaching swivel plates to the end treatments and swivel arms or clips.
Guidance on attaching end treatments to swivel plates, ensuring proper alignment and hanging.
Instructions for operating the Luminette sheers using the PowerView remote control.
Details on basic remote functions like opening, closing, and stopping the sheer movement.
Procedures for resetting travel limits and shade programming for the sheer.
Common problems and solutions for ensuring the sheer operates correctly.
Instructions for safely removing the fabric, motor, and headrail from the system.
Steps to detach the headrail from the mounting brackets after removing fabric and motor.
Detailed methods for routine, spot, and deep cleaning of Luminette Privacy Sheers fabric.
Professional cleaning method using injection/extraction equipment for deep fabric cleaning.
Professional cleaning method using ultrasonic tanks for deep fabric cleaning.
Methods for minimizing wrinkles and creases using hand treatment or steam machine.
Information on fabric availability for accessories and coordinating window fashions.
FCC compliance statements and regulations for the device's radio frequency operations.
Industry Canada regulations and compliance notices for radio frequency devices.
Statements regarding compliance with European EMC and R&TTE directives.
Details of what is covered under the Hunter Douglas Lifetime Limited Warranty for window fashion products.
Details of conditions and circumstances not covered by the Lifetime Limited Warranty.
Instructions on how to contact Hunter Douglas or dealers for warranty assistance and service.
General| Brand | HunterDouglas |
|---|---|
| Model | Luminette |
| Category | Home Automation |
| Language | English |
To Next Page
