Message Cause Action
Work area prob-
lem
There is no defined
Work area
. Make a
Work area
in the EPOS app.
Refer to
Work area on page 29
.
No active
Work area
. Activate the
Work area
in the EPOS
app. Refer to
To activate the Site on
page 31
.
Corrupt
Work area
. Delete the
Work area
and redo the in-
stallation. Refer to
Work area on page
29
.
No accurate posi-
tion from satellites
Weak satellite signal to the reference
station.
Examine the installation of the refer-
ence station. Refer to
Installation of the
reference station on page 23
.
The satellite signal is temporary weak.
The product will start to operate when
the satellite signal are good.
Weak satellite signal to the product. The
Work area
includes parts where
the satellite signal is weak. Examine if
the product has satellite signal in all
parts of the
Work area
. Examine if the
sky is obscured. If possible, remove ob-
structing objects. Otherwise, redo the
installation for the
Work area
and ex-
clude these parts. Refer to
Work area
on page 29
The satellite signal is temporary weak.
The product will start to operate when
the satellite signal are good.
Reference station
communication
problem
The reference station is not paired with
the product.
Redo the pairing with the reference sta-
tion. Refer to
To pair the product and
reference station on page 28
.
The reference station is not installed
correctly.
Examine the installation of the refer-
ence station. Refer to
Installation of the
reference station on page 23
.
Reference station radio signal does not
cover the whole
Work area
Test if the product has radio signal from
the reference station in all parts of the
Work area
. If not, redo the installation
of the reference station or the installa-
tion of the
Work area
. Refer to
Installa-
tion of the reference station on page
23
.
1460 - 002 - 06.04.2020
Troubleshooting - 51
To Next Page
Loading...
