Huvitz HLM-1 - Page 39

39
HPE-
8000X
HPE-
8000X
HLM-1
1. PRISM DIRECTION
Set direction of cross mark movement on measurement screen.
- Comfort (Comfortable) : Set cross mark to move in the direction of lens
movement for user convenience. (Prism Display: Prism angle and cross
mark position on screen might not accord during PB setting.)
- Original : Set cross mark to move in the basic prism direction.
2. SLEEP MODE
Enable/disable screen saver function.
- Off : Disable the function.
- 3min : Set the function with 3minute.
- 5min : Set the function with 5minute.
- 10min : Set the function with 10minute.
3. LANGUAGE
Select language to display user setting menu.
- English : Display menu in English.
4. RS-232C (COM)
Set RS-232C (COM) (external) communication protocol.
- OFF : Disable the function.
- Wave Line : Enable single direction communication protocol function
between HLM and HRK, HDR.
- LMTORK : Enable bi-direction communication protocol function between
HLM and HRK, HDR.
5. BPS
Set communication speed with outside.