Huvitz HLM-1 - Page 48

48
④ Pull up the lens holder and place the left lens.
When ‘SINGLE LENS’ function is On, press ‘S->R’ button ( ) to
select a lens to measure.
⑤ Adjust focus until ‘MARKING OK’ is displayed. Press ‘MEM’ button to save the
measurement.
If ‘AUTO RL’ function enabled to On, make sure the ‘no lens’ icon is displayed on
the bottom left corner of the screen after right lens measurement is completed
before placing the left lens for Auto RL function to work properly.
!
CAUTION
!
CAUTION