To Next Page

To Previous Page

2.6

COOLANT “F2”:

• Press F2 continuously until desired COOLANT mode is selected. The pictogram will be changed to

yellow when selected.

• Coolant O󰀨 (White Background) - When selected no coolant will ow

• Coolant Manual - When selected Coolant will ow continuously

• Coolant Automatic - When selected Coolant will ow only when the blade is running OR when the

blade is running and the head is descending.

reset

RUN

PROG

reset

QUEUE

reset

TCT

inch

MIST OPTION “F4”:

• Press F4 continuously until desired MIST mode is selected. The pictogram will be changed to yellow

when selected.

• Mist O󰀨 (White Background) - When selected no coolant will ow

• Mist Manual & Automatic - Blade start must be selected for the MIST to operate

UNITS “F3”:

• This button is used to change the values between metric and imperial

RESET PC “F5”:

• This button is used to reset the number of pieces cut

RESET QUEUE “F1”:

• This button is used to reset the queue

RESET TCT “F4”:

• This button is used to reset the total time cut

RUN PROG “F5”:

• This button is used to program a sequence of jobs in Automatic Queue Mode

Hyd-Mech S20A User Manual

Questions and Answers: