EasyManuals Logo

Hyd-Mech S20A User Manual

Hyd-Mech S20A
60 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
9.1
Hyd-Mech Group Limited warrants parts/components on each new S23A bandsaw to be free from failure
resulting from defective material and workmanship under proper use and service for a period of two years
on following the date of shipment from the factory. Hyd·Mech’s sole obligation under this warranty is limited
to the repair or replacement without charge, at Hyd·Mech’s factory, warehouse, or approved repair shop
any part or parts which Hyd·Mech’s inspection shall disclose to be defective. Return freight must be pre-
paid by the user.
This warranty, in its entirety, does not cover maintenance items, including but not limited to lubricating grease
and oils, lters, V-belts, saw blades, etc., nor any items therein which show signs of neglect, overloading,
abuse, accident, inadequate maintenance, or unauthorized altering.
MOTOR, GEARBOX, PUMP, ELECTRIC COMPONENTS, VALVES, HOSES, FITTINGS, and any other
items used in the manufacture of the S23A, but not originally manufactured by Hyd·Mech are subject to the
original manufacturer’s warranty. Hyd·Mech will provide such assistance and information as is necessary and
available to facilitate the user’s claim to such other manufacturer.
Liability or obligation on the part of Hyd·Mech for damages, whether general, special or for negligence and
expressly including any incidental and consequential damages is hereby disclaimed. Hyd·Mech’s obligation
to repair or replace shall be the limit of its liability under this warranty and the sole and exclusive right and
remedy of the user.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, WRITTEN OR ORAL, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty may not be changed, altered, or modied in any way except in writing by Hyd-Mech
Group Limited
HYD·MECH GROUP LIMITED
1079 Parkinson Road
P.O. BOX 1659
Woodstock, Ontario
N4S 0A9
Phone: (519) 539-6341
Fax: (519) 539-5126
Toll Free: (877) 276-SAWS (7297)
E-mail: info@hydmech.com
SECTION 9 - WARRANTY
WARRANTY

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hyd-Mech S20A and is the answer not in the manual?

Hyd-Mech S20A Specifications

General IconGeneral
BrandHyd-Mech
ModelS20A
CategorySaw
LanguageEnglish

Related product manuals