3.2
RESTORING MACHINE TO USE
After completion of all repairs or maintenance to the locked-out machine, it shall be restored to use as follows:
The person(s) who performed the work shall verify that all areas around the machine are safe, before the machine is
re-energized. No-one shall be permitted in unsafe areas around the machine. All guards and covers shall be properly
installed.
Each lock-out padlock shall be removed by the person who applied it.
After the lock-out padlocks are removed, and before the machine is started, the supervisor and all other employees who
use the machine, shall be informed that the lock-out has been removed. After notication is made, the machine may be
re-started.
Machine Power Disconnect located on the side of the machine control box.
1. Ensure switch is in the OFF position.
2. Close the disconnect switch cover.
3. Install padlock and lock it.
To Next Page
Loading...
Need help?
General
