Hyd-Mech V18APC - SECTION 8 - SPECIFICATIONS; V18 APC TECHNICAL SPECIFICATIONS

8.1
SECTION 8 - SPECIFICATIONS
V18APC SPECIFICATIONS
at 90º round
at 45º rectangular
V18APC-60 BANDSAW SPECIFICATIONS
Capacity
HEAD CANT STRAIGHT HEAD 3 DEGREE
at 90º rectangular 18" x 23" (457mm x 584mm) 18" x 22" (457mm x 558mm)
18" (457mm) with tall vise insert option
18" x 16" (457mm x 406mm) 18" x 14.75" (457mm x 374mm)
at 30º rectangular 18" x 10.25" (457mm x 260mm) 18" x 9" (457mm x 228mm)
WITH BUNDLING OPTION
at 90º rectangular
18" x 12" (457mm x 305mm)
at 45º rectangular
at 30º rectangular 18" x 6" (457mm x 152mm)
Blade
Length 16'11" ( 5157mm)
Width 1 1/4" (31.75mm)
Blade Tension Hydraulic
Blade Speed variable 65 - 385 sf/min (20 - 118 m/min)
Blade Guides carbide inserts
Blade Wheel Dia. 19" (483mm)
Motors
blade drive 7 1/2 HP (5.6 KW)
hydraulic pump drive 2 HP (1.5 KW)
Pumps
Hydraulic 6 1/2 U.S. Gal. / min (25 Liters / min)
Coolant 3 1/2 U.S. Gal. / min (13 Liters / min)
Vises hydraulic full stroke
Head Swing hydraulically positioned and locked, full 60º left or right
Table Height 44" (1117mm)
Feed System variable pressure 0-300 PSI (0-2068 kPa), variable rate 0-15 in/min (0-380 mm/min)
V18APC-60 only Hydraulic 40" multi index bar feed
System Pressure 900 PSI (6200 kPa)
Tank Capacity
Hydraulic 8 US Gallons (30 Liters)
Coolant 30 US Gallons (114 Liters)
Overall Dimensions
112" ( 2845mm) high @ 90º x 123" (3124mm) wide x 188" (4775mm) long
Guide Arm hydraulically positioned and locked
Machine Weight 9000 lbs (4082 kg) Main Machine: 6000 lbs (2721 kg) Infeed: 3000 lbs (1361 kg)