140
8. Warning List
Warning
No.
Warning Picture Cause Action
8
Impossible to start auto cycle
because Pushrod is not at zero
point.
Bar feeder is not in
reference position.
-Touch on <NEXT>.
-Select manual mode at bar
feeder and go to reference.
9
Impossible to start auto cycle
because mechanism is not at down
position.
Bar feeder is not at
down position.
-Touch on <NEXT>.
-Select manual mode at bar
feeder and go down.
10
Impossible to start auto cycle
because cover is open.
Somebody opened the
cover or there is a
problem at the interlock
switch.
-Touch on <NEXT>.
-Close the cover.
-Check the interlock switch.
To Next Page
Loading...
