Hypertherm Powermax125 - Hand Cutting Techniques

Powermax125 Operator Manual 808080 Revision 0 55
Section 5
Hand Cutting
Using the hand torch
WARNING!
INSTANT-ON TORCHES
PLASMA ARC CAN CAUSE INJURY AND BURNS
Plasma arc comes on immediately when the torch trigger is activated. The plasma arc will cut quickly
through gloves and skin.
 Wear correct and appropriate protective equipment.
 Keep hands, clothing, and objects away from the torch tip.
 Do not hold the workpiece and keep your hands clear of the cutting path.
 Never point the torch toward yourself or others.