To Next Page

To Previous Page

SPECIFICATIONS

1-6 powermax

Operator Manual

T45v and T45m torch specifications

Handheld cut capacity (material thickness)

Recommended cut capacity (hand

cutting)

1/2 in (12.7 mm)

Maximum cut capacity (hand cutting

or mechanized edge start)

3/4 in (19.1 mm)

Severance capacity (hand cutting or

mechanized edge start)

1 in ( 25.4 mm)

Mechanized pierce capacity (material thickness)

Pierce capacity

(for edge starts, the capacities are

the same as the handheld capacities)

3/8 in (9.5 mm)

Recommended cut speed (on mild steel)

1/4 in (6.35 mm) 60 ipm (1524 mm/min)

3/8 in (9.53 mm) 32 ipm (813 mm/min)

1/2 in (12 mm) 20 ipm (508 mm/min)

3/4 in (18 mm) 8 ipm (203 mm/min)

1 in (24 mm) 4 ipm (102 mm/min)

Gouging capacity

Metal removal rate on mild steel 6.2 lbs/hr (2.8 kg/hr)

Weight

T45v torch only 0.6 lbs (0.27 kg)

T45v with 20 ft (6.1 m) lead 3.4 lbs (1.55 kg)

T45v with 50 ft (15.24 m) lead

7.8 lbs (3.54 kg)

T45m torch only 1.0 lbs (0.45 kg)

T45m with 25 ft (7.62 m) lead 5.0 lbs (2.27 kg)

T45m with 35 ft (10.7) lead 6.4 lbs (2.9 kg)

T45m with 50 ft (15.24) lead 8.5 lbs (3.85 kg)

Hypertherm powermax45 Operator's Manual

Other manuals for Hypertherm powermax45