Hypertherm powermax45

SPECIFICATIONS
powermax 45 Operator Manual 1-7
Symbols and markings
Your Hypertherm product may have one or more of the following markings on or near the data
plate. Due to differences and conflicts in national regulations, not all marks are applied to every
version of a product.
S mark symbol
The S mark symbol indicates that the power supply and torch are suit able for operations carried out
in en vi ron ments with in creased hazard of elec tri cal shock per IEC 60974-1.
CSA mark
Hypertherm products with a CSA mark meet the United States and Canadian regulations for product
safety. The products were evaluated, tested, and certified by CSA-International. Alternatively the
product may have amark by one of the other Nationally Recognized Testing Laboratories (NRTL)
accredited in both the United States and Canada, such as Underwriters Laboratories, Incorporated
(UL) or TÜV.
CE marking
The CE marking signifies the manufacturer’s declaration of conformity to applicable European
directives andstandards. Only those versions of Hypertherm products with a CE marking located on
or near the dataplate have been tested for compliance with the European Low Voltage Directive and
the European Electromagnetic Compatibility (EMC) Directive. EMC filters needed to comply with the
European EMC Directive are incorporated within versions of the product with a CE marking.
GOST-R mark
CE versions of Hypertherm products that include a GOST-R mark of conformity meet the product
safety andEMC requirements for export to the Russian Federation.
c-Tick mark
CE versions of Hypertherm products with a c-Tick mark comply with the EMC regulations required
for sale inAustralia and New Zealand.
CCC mark
The China Compulsory Certification (CCC) mark indicates that the product has been tested and
found compliant with product safety regulations required for sale in China.