Hypertherm SYNC Powermax 65 - What to Do if Components Are Missing or Damaged; System Configurations

Install and Set Up the Plasma Power Supply
2
Powermax65/85/105 SYNC Operator Manual 810470 23
What to do if components are missing or damaged
 Claims for damage during shipment
 Send a claim to the carrier if your system was damaged during shipment.
 Get the system’s model number and serial number from the data plate on the rear of the
plasma power supply. Refer to Find system specifications on the data plate on page 30
for a sample data plate.
 Get a copy of the bill of lading from Hypertherm.
 Claims for missing or damaged merchandise
 Speak to your Hypertherm distributor or authorized repair facility, or speak to the nearest
Hypertherm office shown in the front of this manual.
System configurations
The Powermax65 SYNC, Powermax85 SYNC, and Powermax105 SYNC systems are universal
plasma power supplies that automatically adjust to operate with various AC voltages. The following
system configurations are available:
Model Configurations AC Voltages
Powermax65 SYNC
and
Powermax85 SYNC
200 V – 600 V CSA
200 V – 480 V (1-phase)
200 V – 600 V (3-phase)
380 V CCC / 400 V CE 380 V / 400 V (3-phase)
Powermax105 SYNC
200 V – 600 V CSA 200 V – 600 V (3-phase)
230 V – 400 V CE 230 V – 400 V (3-phase)
380 V CCC / 400 V CE 380 V / 400 V (3-phase)