15
[* For warranty period and warranty range, refer to the ASEP/PSEP Operation Manual on the
Operation Manual CD.]
1. Product Check
This product is comprised of the following parts if it is of standard confi guration.
If you fi nd any fault in the contained model or any missing parts, contact us or our distributor.
1.1 Parts (The option is excluded.)
No. Part Name Model
1 Controller [Refer to “4. How to read the model plate”.]
Accessories
2 I/O Flat cable
Standard type CB-APSEP-PIO*** (***indicates the cable length)
Dust-proof type
(Equivalent to IP53)
CB-APSEPW-PIO*** (***indicates the cable length)
3 Power Connector MC1.5/5-ST-3.5(PHOENIX CONTACT)
4 Spacer PFP-S (Maker: OMRON)
5
Absolute Battery Unit
(For Simplifi ed Absolute Type Only)
SEP-ABU(Standard type)
SEP-ABU-W(Dust-proof type)
6 Operation Manual (This Manual)
7 Operation Manual (CD)
8 Safety Guide
1.2 Teaching Tool (Option)
For the setups such as position setting and parameter setting using the teaching operation, the
teaching tool is required. Prepare it.
No. Part Name Model
1 Touch panel teaching tool specially for PSEP/ASEP SEP-PT
2
PC Software (Includes RS232C Exchange Adapter + Peripheral
Communication Cable)
RCM-101-MW
3
PC Software
(Includes USB Exchange Adapter + USB Cable + Peripheral
Communication Cable)
RCM-101-USB
Note : The contents of this Operation Manual are the same as those of the
Operation Manual attached to the product.
To Next Page
Loading...
Need help?
General
