IBM 6580

AC Drive Motor Capacitor Removal
1. Turn the system power off.
2. Disconnect the diskette AC power
cable from Connector 8.
3. Perform .the Cover Removal.
4. If necessary, perform the Right
Diskette Drive Removal.
5. Disconnect the AC drive motor ,pow-
er cable 0 .
DANGER
High voltage may be
present at
the capacitor terminals.
6. Remove
the
two
insulator caps
•
from the capacitor terminals.
7 • Discharge
the
capacitor
J."
by
jumpering
its terminals with
a
large-bladed screwdriver.
8. Remove
the three motor leads
,0;
from the capacitor terminals.
9. Remove the screw '01 and remove
the capacitor bracket assembly
O·
7-42 IBM Displaywriter Product Support Manual