IBM 7212 102 User Manual

d. Ensure chassis tabs located on bottom edge of the metal drive chassis fit
into the notches on the bottom of the bezel.
e. After the bezel is installed on the drive, make sure that the front door
opens and closes without resistance. If the door appears stuck when you
try and open in, then the bezel is installed improperly. Remove the bezel
and repeat the bezel installation procedure, insuring that the door is kept
open while installing the bezel.
Attention: Attempting to force the door open with the bezel installed
incorrectly may result in damage to both the bezel and drive, requiring repair
or replacement.
12. Attach the top cover.
13. Reassemble the enclosure in reverse order.
14. Replace the drive and media.
58 7212 Storage Device Enclosure Service Guide

IBM 7212 102 Specifications

General

Brand	IBM
Model	7212 102
Category	Storage
Language	English