adapter exceeds the maximum write capability, the adapter's replacement is not covered under IBM
warranty or maintenance. This adapter has protection against single Flash channel failures. To prevent
the entire adapter from failing, software RAID should be used. For high-value applications where the
content in the adapter must be protected, additional NVMe Flash adapters with OS mirroring or software
Redundant Array of Independent Disks (RAID) are recommended. This adapter is not supported in the
PCIe Gen3 I/O drawer.
Figure 34. PCIe3 x8 NVMe 6.4 TB SSD NVMe Flash Adapter
Specications
Item
Description
Adapter FRU number
01LK435 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe3 x8
116
Power Systems: Managing PCIe adapters