• SAS Serial SCSI Protocol (SSP), Serial ATA Tunneling Protocol (STP), and Serial Management
Protocol (SMP)
• Removable media device supported
• Concurrent rmware update
• 440-500 Mhz PowerPC
®
(PPC)
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. For information about operating system and partition requirements, see one of the following
topics:
• The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://
www.ibm.com/support/xcentral/).
• Power Systems Prerequisites (http://www14.software.ibm.com/support/customercare/iprt/home).
• IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
• The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded
from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/webapp/
set2/sas/f/lopdiags/home.html).
• For support details, see the Linux Alert website
(http://www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
PCIe3 cable adapter (FC EJ1R; CCIN 58FF)
Learn about the specications and operating system requirements for the feature code (FC) EJ1R
adapter.
Overview
FC EJ1R is a double-wide, low-prole PCIe3 cable adapter. The adapter provides two optical ports for the
attachment of two expansion drawer cables. One adapter supports the attachment of one PCIe3 6-slot
fanout module in a EMX0 PCIe Gen3 I/O expansion drawer.
Note: The FC EJ1R (CCIN 58FF) adapter only works with the CCIN 50CD PCIe3 6-slot fanout module.
Figure 57 on page 165 shows the adapter.
164
Power Systems: Managing PCIe adapters
To Next Page
Loading...
Need help?
General
