(continued)
Zip Drive
The factory installed Zip drive operates in the same manner as a hard drive.
The Zip drive, in the Setup Utility, will display as a hard disk drive with a
capacity of 100 MB.
The Zip drive is jumpered as Master. See “Zip Drive” on page 5-24 for
jumper settings. The following drive initialization information must be
entered in the CMOS only when configuring the Zip drive as the boot drive.
Cylinders = 512
Heads = 12
Sectors per Track = 32
Refer to “Diagnostics for Factory-Installed Drive Devices Not Supported by
the Diagnostics and Utilities CD” on page 2-49 to check the factory-installed
Zip drive.
Service for external Zip drives shipped with the Aptiva is handled by the Zip
drive manufacturer.
2-48
To Next Page
Loading...
Need help?
General