6. Follow the instructions on the screen.
Note: As you scroll down the selection menu, the Test Group window to
the right changes to correspond to the highlighted Module.
Running Selected Module Tests
To run all selected tests for a test group:
1. Use the up and down arrow keys (↑ and ↓ ) to move the cursor to your
selection.
2. Press Enter.
Note: A appears next to your selection.
Running All Selected Modules
To run all selected test modules:
1. Use the down arrow key (↓ ) to move the cursor to the last choice, Run
All Selected Modules.
2. Press Enter.
Note: A appears next to your selection.
Changing Selected Tests in Test Groups
To change selected tests in a Test Group:
1. In the Module Tests Menu, use the up and down arrow keys (↑ and ↓ )
to move the cursor to your selection.
2. Press Tab to move into the expanded Test Group window.
3. Scroll to the test you want to select or de-select.
Attention: Items indicated by a directly adjacent “*” (red text on color
screens) are destructive tests.
4. Press the spacebar at the highlighted test to toggle between select
(indicated by a ) and de-select.
Note: Pressing the first letter of a test does not activate the test, unlike
menu operation.
5. Press Enter.
3-12
To Next Page
Loading...
Need help?
General