Table 5-3. TV Card Symptom/Action
Symptom Action
Video is unstable. Check that the broadcast standard format is
NTSC (for U.S., Canada, and Latin
America).
Check the quality of the incoming TV signal
on another receiver.
Video is in black and white only. Check the connectors setting to make sure
the correct input (CATV, Composite, or
S-Video) is selected for the video source
device.
No video or audio. Check that the audio and video connectors
are securely plugged into the correct TV
card inputs.
Check signal cable.
Check that the TV card is securely seated
in the riser card.
No audio. Ensure that another Windows audio
program is not muting the sound.
Check signal cable.
Captured images have jagged
edges.
If One Field (non-interlaced) was captured,
images may appear jagged. Click Both
Fields in the Video dialog.
5-18
To Next Page
Loading...
Need help?
General