IBM Aptiva 2134 - Page 262

parts catalog 7-1
CD-ROM drive 7-13
diskette drive 7-11
hard disk drive 7-11
keyboard 7-19
machine type 2134 exterior 7-3
machine type 2134 interior 7-4
Machine Type 2176 exterior 7-7
Machine Type 2176 interior 7-8
monitor 7-16
mouse 7-19
power cord (linecord) 7-16
software 7-21
sound adapter card 7-13
parts/test point locations 5-1
plug and play adapter cards 1-22
plug and play screen 1-22
positionnement du sélecteur de
tension viii
POST 1-3, 3-2
POST error codes 2-3
POST error history 1-26, 2-70
printing 2-70
viewing 2-70
power check 2-35
power connector 5-31
power supply 1-9
power supply specifications 5-8
power supply, removing 4-10, 4-27
power-on password, CMOS reset
Type A-1 system board 1-14
power-on self test 3-2
preloaded software recovery CD 7-21
primary hard disk drive connector
(IDE) 5-20
processor (type A-1) removal 4-14, 4-32
processor (type A-2) removal 4-15
processor bus jumpers—type A-1 5-4
processor jumper settings—type A-1
type A-1 processor jumpers 5-4
processor removal, type A-1 4-14, 4-32
processor removal, type A-2 4-15
processor upgrade, removing system
board A-2 4-34
processors
P54C-100 MHz 1-9
P54C-120 MHz 1-9
P54C-133 MHz 1-9
P54C-150 MHz 1-9
P54C-166 MHz 1-9
P54C-200 MHz 1-9
product description 1-6
Q
QAPlus diagnostic diskette 3-4
QAPlus/PRO diagnostics 3-3
R
RAM 1-27
rapid resume manager 1-24
recovery software installation 4-42
refresh rates and monitor frequencies,
type A-2. 1-13
removal, processor type A-1 4-14, 4-32
removal, processor type A-2 4-15
removing parts
machine type 2134 4-2
3.5-in. bays 4-6
5.25-in. bays 4-7
adapter cards 4-9
battery 4-16
cache, type A-1 4-13, 4-31
cover 4-3
hard disk drive 4-8
LED and cable 4-17
left drive support bracket 4-4
power supply 4-10
processor, type A-1 4-14, 4-32
processor, type A-2 4-15
removal processor type A-1 4-14,
4-32
removal processor type A-2 4-15
right drive support bracket 4-5
riser card 4-11
SIMMs 4-12
system board 4-18
machine type 2176 4-20
3.5-in. bays 4-21
X-4