IBM Aptiva 2144 - Page 240

diagnostic menus (continued)
video graphics array menu 3-7
diagnostic procedures 2-1
diskette change test 3-5
diskette connector 5-24
diskette drive 1-9
diskette drive menu 3-5
display (monitor) self test 3-12
display the error log 3-11
displays
See monitors (displays)
DRAM (video memory), removing 4-36
DRAM (video memory), type I-1,
removing 4-17
DRAM (video memory), type I-2,
removing 4-18
dual 3.5-in. and 5.25-in. diskette
drive 4-28
dual 3.5-in. and 5.25-in. diskette drive,
removing 4-7
E
emergency disc eject procedure 4-9
error codes 2-20
error detection and correction 3-6
error history, POST 1-26
error log, intermittent
creating the 3-10
display the 3-11
ESD-sensitive parts, handling 4-41
F
FAX/modem adapter check 2-49
field replaceable units (FRUs) 7-1
format
conditional 3-8
unconditional 3-8
format utility 3-6, 3-8
formatting procedure 3-9
FRUs 7-1
G
general information 1-1
graphic tests 3-7
H
handling ESD-sensitive parts 4-41
hard disk connectors 5-25
hard disk drive 1-10
hard disk drive check 2-38
hard disk drive jumper settings 5-11
hard disk drive menu 3-6
hard disk drive, removing 4-8, 4-29,
4-30
hardware configuration
changes 1-16
—
1-22
hardware interfaces 1-11
I/O adapter cards 1-11
math coprocessor 1-11
monitors 1-11
parallel 1-11
serial 1-11
head select 3-6
history, POST errors 1-26
I
I/O adapter cards, interfaces 1-11
icon 3-2
IDE connector 5-11
index of symptoms, messages, error
codes, or beeps 2-10
indicator LED and cable,
removing 4-22, 4-39
installed devices check 2-38
ISA AT riser connector 5-26
J
Japanese models, table A-7
X-2