Table 2-1 (Page 14 of 15). POST and Advanced Diagnostics Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps
Action/FRU
11XX - Serial port test errors not
listed above
Test using a wrap plug while running
Advanced Diagnostics.
“Advanced Diagnostics Device Presence
Test” on page 2-34
Serial port
System board
On the system board:
1780/1790 - Hard Disk Drive 1
1781/1791 - Hard Disk Drive 2
1782/1792 - Hard Disk Drive 3 or
CD-ROM drive
1783/1793 - Hard Disk Drive 4 or
CD-ROM drive if
Hard Disk Drive 3
installed
Hard disk drive connection/cable/jumpers
If an upgrade processor is installed, check
that the proper speed has been set
(jumpers and Setup Utility). Speed should
be a multiple of the original processor
speed.
Hard disk drive size set correctly in Setup
Utility
Hard disk drive
System board
17XX - Hard disk drive error
All 17XX errors not listed above.
“Factory-Installed Drive Devices” on
page 2-38
Hard disk drive jumpers
Hard disk drive connection/cable
Hard disk drive
System board
Power supply
2401 - Monitor changing colors Monitor
2408 error System board
2409 error Monitor
2410 error System board
24XX - Video/monitor error “Monitor” on page 2-54
Optional video memory
System board
Monitor
2-24
To Next Page
Loading...
