IBM Aptiva Series Hardware Maintenance

2-10
Table 2- 1 BIOS Error Codes, Messages, and Beeps List
BIOS Error Codes,
Messages, beeps
Action/FRU
048
Diskette Write Protected
Ensure the diskette drive is not set to
[Write protect] in the Security Options
of BIOS Setup.
050
IDE Drive 0 Error
Ensure the hard disk 0 is set to [AUTO]
in the Disk Drives of BIOS Setup.
Check hard disk jumper. See “Hard Disk
Drive Jumper Settings” on page 5-11.
Hard disk drive power.
Hard disk cable/connection.
Hard disk
051
IDE Drive 1 Error
Ensure the hard disk 1 is set to [AUTO]
in the Disk Drives of BIOS Setup.
Check hard disk jumper. See “Hard Disk
Drive Jumper Settings” on page 5-11.
Hard disk drive power.
Hard disk cable/connection.
Hard disk
052
IDE Drive 2 Error
Ensure the hard disk 2 is set to [AUTO]
in the Disk Drives of BIOS Setup.
Check hard disk jumper. See “Hard Disk
Drive Jumper Settings” on page 5-11.
Hard disk drive power.
Hard disk cable/connection.
Hard disk
053
IE Drive 3 Error
Ensure the hard disk 3 is set to [AUTO]
in the Disk Drives of BIOS Setup.
Check hard disk jumper. See “Hard Disk
Drive Jumper Settings” on page 5-11.
Hard disk drive power.
Hard disk cable/connection.
Hard disk

IBM Aptiva Series Specifications

General

Brand	IBM
Model	Aptiva Series
Category	Desktop
Language	English