IBM AS/400e - Chapter 2. Setting up Your

Note: If you encounter difficulties during the installation, contact your authorized
dealer or service provider.
__ 5. After your system unit has completely powered down, power off all PCs
and devices, such as printers and display stations, that are connected to the
system unit.
__ 6. Unplug any power cords, such as for printers and display stations, that are
connected to the system unit.
__ 7. Unplug the power cord for the system unit from the electrical outlet.
If you are setting up a 5065 Expansion Unit, go to “Chapter 2. Setting up your 5065
Expansion Unit” on page 7. If you are setting up a 5066 Expansion Unit, go to
“Chapter 3. Setting up your 5066 Expansion Unit” on page 17
6 Setting Up Your 5065 or 5066 Expansion Unit V4R5