Locating 5066 connectors
Connecting your 5066 to your system unit
Use the procedure below to connect your 5066 to your system unit.
Your 5066 consists of two independent 5065 Expansion Units in a single frame.
This procedure refers to the upper 5065 as 5066–002 and the lower 5065 as
5066–001. Refer to Figure 21 on page 20 and Figure 22 on page 20 before you start.
Figure 20. 5066 connector locations
Chapter 3. Setting up your 5066 Expansion Unit 19
To Next Page
Loading...
Need help?
General