IBM eserver pSeries 7311 D10 - Model D20 Location Code Table

Model D20Location Code Table
The following table lists the location codes for a model D20 I/O subsystem. The location
code for the I/O subsystem connected to a system unit is U0.
dd (where dd can be any
number from 2 through 63).
FRU Name Physical Location Code
Model D20 I/O Drawer U0.
dd ( dd = any number from 2 through 63)
Rack frame U0
I/O drawer backplane U0.
dd -P1
I/O subsystem drawer U0.
dd
RIO Bus Adapter
RIO bus adapter U0.
dd -P1.1
RIO port 1 upper connector U0.
dd -P1.1/Q1
RIO port 1 cable U0.
dd -P1.1/Q1#
RIO port 0 lower connector U0.
dd -P1.1/Q2
RIO port 0 cable U0.
dd -P1.1/Q2#
PCI Bus Controller
PCI bus controller PHB0 U0.
dd -P1
PCI to PCI bridge EADS-X U0.
dd -P1
PCI Bus Controller PHB2
PCI bus controller PHB2 U0.
dd -P1
PCI to PCI bridge EADS-X U0.
dd -P1
Pluggable Adapter Slots
PCI slot 1 U0.
dd -P1/I1
PCI card in slot 1 U0.
dd -P1-I1
PCI slot 2 U0.
dd -P1/I2
PCI card in slot 2 U0.
dd -P1-I2
PCI slot 3 U0.
dd -P1/I3
PCI card in slot 3 U0.
dd -P1-I3
PCI slot 4 U0.
dd -P1/I4
PCI card in slot 4 U0.
dd -P1-I4
PCI slot 5 U0.
dd -P1/I5
PCI card in slot 5 U0.
dd -P1/I5
PCI slot 6 U0.
dd -P1/I6
PCI card in slot 6 U0.
dd -P1/I6
PCI slot 7 U0.
dd -P1/I7
PCI card in slot 7 U0.
dd -P1/I7
Power Supply
Power supply 1 (no internal blower) U0.
dd -V1
Power supply 2 (no internal blower) U0.
dd -V2
34 Eserver pSeries 7311 Model D10 and Model D20 Service Guide