Table 2. Firmware Checkpoints (continued)
Checkpoint Description Action/
Possible Failing FRU
E1F3 Privileged-access password
prompt
Prompt should be visible on
the system console.
If a console is attached but
nothing is displayed on it, go
to the “Entry MAP” on page
71 with the symptom ″All
display problems.″
E1F5 Build boot device list
Entering SMS Multiboot. (See
“MultiBoot” on page 408 for
more information.)
If Multiboot was not enabled
through SMS, see “Note” on
page 137.
E1F6 Determine boot device
sequence
See “Note” on page 137.
E1F7 No boot image located Follow the repair actions
listed for error code
20EE000B.
E1FB Scan SCSI bus for attached
devices
If a location code is available,
follow the repair actions listed
for error code 21A000XX.
150 Service Guide
To Next Page
Loading...
Need help?
General