IP Parameters
Select the IP Parameters option from the Network Parameters menu to display a screen similar to the
following:
IP Parameters
1. Client IP Address [9.3.146.162]
2. Server IP Address [9.3.146.171]
3. Gateway IP Address [0.0.0.0]
4. Subnet Mask [255.255.255.0]
.------.
|X=Exit|
`------’
===>
To set an address using this menu, do the following:
1. Type the number of the selection (1, 2, 3, or 4).
2. Enter the address on the next screen.
Attention: If the client system and the server are on the same subnet, set the gateway IP address to
[0.0.0.0].
404 Service Guide
To Next Page
Loading...
Need help?
General