Ping
Select Ping from the Network Parameters menu to test a connection to a remote system unit. After
selecting the ping option, you must first choose an adapter to communicate with the remote system.
Adapter Parameters
Device Slot Hardware Address
1. Gigabit Ethernet 4: P1-I4/E1 0004ac7c0135
2. token-ring 5: P1-I5/T1 0020357a9105
3. ethernet Integrated:P1/E1 0060949d7ac5
4. ethernet 2: P1-I2/E1 0004ac5e692b
5. token-ring 3: P1-I3/T1 0004ac634e38
.------.
|X=Exit|
`------’
(PRESS ENTER AFTER MAKING A SELECTION) ===>
After determining which adapter to use to ping the remote system, you must provide the addresses
needed to communicate with the remote system. Select the appropriate device from the Ping menu to
display a screen similar to the following:
PING IP Address
1. Client IP Address [9.3.146.162]
2. Server IP Address [9.3.146.171]
3. Gateway IP Address [0.0.0.0]
4. Subnet Mask [0.0.0.0]
.---------. .------.
|E=Execute| |X=Exit|
`---------’ `------’
===>
406 Service Guide
To Next Page
Loading...
Need help?
General