Step 1020-2
There is a problem with the keyboard.
Find the type of keyboard you are using in the following table; then follow the instructions given in the
Action column.
Keyboard Type Action
Type 101 keyboard (U.S.). Identify by the size of the
Enter key. The Enter key is in only one horizontal row of
keys.
Record error code M0KBD001; then go to “Step 1020-3.”
Type 102 keyboard (W.T.). Identify by the size of the
Enter key. The Enter key extends into two horizontal
rows.
Record error code M0KBD002; then go to “Step 1020-3.”
Type 106 keyboard. (Identify by the Japanese
characters.)
Record error code M0KBD003; then go to “Step 1020-3.”
ASCII terminal keyboard Go to the documentation for this type of ASCII terminal
and continue problem determination.
Step 1020-3
Perform the following:
1. Find the eight-digit error code in Chapter 5, “Error Code to FRU Index,” on page 159.
Note:
If the eight-digit error code is not listed in the Error Code to FRU Index, look for it in the
following:
v Any supplemental service manuals for attached devices
v The diagnostic problem report screen for additional information
v The Service Hints service aid
v The CEREADME file (by using the Service Hints service aid).
Note:
Service aids can be found in RS/6000 and Eserver pSeries Diagnostic Information for Multiple
Bus Systems.
2. Perform the action listed.
Chapter 3. Maintenance Analysis Procedures 81
To Next Page
Loading...
Need help?
General