IBM System x3500 Service Guide

must type the administrator password to access the full Configuration/Setup
Utility menu. If you do not type the administrator password, a limited
Configuration/Setup Utility menu is available.
3. Select settings to view or change.
Configuration/Setup Utility menu choices
The following choices are on the Configuration/Setup Utility main menu. Depending
on the version of the BIOS, some menu choices might differ slightly from these
descriptions.
v System Summary
Select this choice to view configuration information, including the type, speed,
and cache sizes of the microprocessors and the amount of installed memory.
When you make configuration changes through other choices in the
Configuration/Setup Utility program, the changes are reflected in the system
summary; you cannot change settings directly in the system summary.
This choice is on the full and limited Configuration/Setup Utility menu.
– Processor Summary
Select this choice to view the processor information, including the type, speed,
and cache size of the microprocessor.
Chapter 2. Configuration information and instructions 15

IBM System x3500 Specifications

General

Chipset	Intel 5000P
Maximum Memory	48 GB
Memory Slots	12
Network Interface	Dual Gigabit Ethernet
Processor	Intel Xeon 5400/5300/5200 series
Form Factor	5U Tower
Memory Type	DDR2 FB-DIMM
Storage	Up to 6 x 3.5" SAS/SATA HDDs
RAID Support	RAID 0, 1
Expansion Slots	6 x PCI-E slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESX Server