Replacing an UltraslimBay device
Warm-swapping a device in the UltraslimBay
Warm swap
means to remove or reconnect a device when the
computer is in suspend mode. Warm swap is enabled as a default
on your computer.
To check whether warm swap is enabled, do as follows:
1
Start the ThinkPad Configuration program.
“ThinkPad Configuration program” on page 25.
2
Click UltraBay ( ).
3
Make sure that the Warm swap devices check box is
selected.
If the check box is clear, select it and restart your computer
to make the change effective.
To warm-swap a device in the UltraslimBay, enter the computer
into suspend mode; then swap the device.
Make sure that the bay LED is off when you remove the
UltraslimBay device.
Bay LED
Bottom view
Chapter 2. Extending the features of your computer 89
To Next Page
Loading...
Need help?
General
