Using the Personalization Editor
11
Insert the backup copy of the
Personalization Data
Update Diskette
into the diskette drive; then power on
the computer.
12
Select Update personalization data at the menu
window; then follow the instructions on the window.
Your data is copied from the
Personalization Data Update
Diskette
and stored in the nonvolatile memory in the
computer.
13
After the data is stored, power off the computer.
14
Set your password if you have not yet set it.
Click Help for more information.
The information that you have typed in will be displayed the next
time you power on the computer.
Deleting the personalization window
To delete the personalization window and revert to the default
password prompt, do the following:
1
Power off the computer.
2
Insert the backup copy of the
Personalization Data
Update Diskette
into the diskette drive; then power on
the computer.
3
Select Delete personalization data from the menu;
then follow the instructions on the screen.
4
After the data is updated, restart the computer.
108 IBM ThinkPad 600X User's Reference
To Next Page
Loading...
Need help?
General
