IBM ThinkPad 600X User Manual

Functions of your computer
ThinkPad Utility programs
Your computer has the following utility programs for easy
configuration:
 Easy-Setup
 ThinkPad Configuration program
This section summarizes these utility programs.
Easy-Setup
Your computer provides a user-friendly program called Easy-Setup ,
which enables you to select various setup parameters:
 Config: Set the configuration of your computer.
 Date/Time: Set the date and time.
 Password: Set a password.
 Start up: Set the startup device.
 Restart: Restart the system.
To start Easy-Setup, do as follows:
1 Power off the computer, and remove any diskette from
the diskette drive.
2 Press and hold F1; then power on the computer. Hold
F1 until the “Easy-Setup” menu appears.
If you have set a password, the “Easy-Setup” menu appears
after you enter the password.
Test
Easy-Setup
BIOS part number,..Date
System-unit serial number
System board serial number
Microprocessor
nnnnnnnnnnnnnnnn
nnnnnnnnnnn
Pentium( )II Processor
**
nnnnnnn
12/31/99
Date/Time Password Start up
Restart
Config
UUID
nnnnnnnn-nnnn-nnnn-nnnn-nnnnnnnnnnnn
**
Trademark of Intel Corporation
(C) Copyright IBM Corp. 1992,1999 All Rights Reserved.
16 IBM ThinkPad 600X User's Reference

IBM ThinkPad 600X Specifications

General

Brand	IBM
Model	ThinkPad 600X
Category	Laptop
Language	English