Using Passwords
10
Type the new password again to verify it; then press
Enter.
11
Press Enter again.
12
Click Exit; then click Restart.
The supervisor password has been changed. Your computer
restarts.
The following window appears, reminding you to write
down the password and keep it in a safe place:
Removing a power-on password with supervisor authority
You can remove a power-on-password (even if you don't know it) if
you know the supervisor password.
1
Power on the computer by pressing F1.
The password prompt appears.
2
Enter the supervisor password.
The “Easy-Setup” menu appears.
3
Select Password on the menu.
4
Select Power on on the menu.
Chapter 3. Protecting your computer 103
To Next Page
Loading...
Need help?
General
