Functions of your computer
If you are using a
remote program loading (RPL) system
through
a token-ring card or some other network card, do the following:
1. Click Network. The “Speed” menu appears.
2. If you are using a token-ring card, click the speed you want, 4
or 16; then press Enter.
If you are using a network card other than a token-ring card,
such as an Ethernet card, you need not specify the RPL speed.
Press Esc to exit this menu.
If you select PCMCIA, representing, for example, an ATA-3 HDD or
a Flash memory card, and cannot start the system, disable the
secondary IDE device and restart the system. Some cards might
not be compatible with a CD-ROM or DVD-ROM drive.
The CDROM icon is assigned to the CD-ROM drive in the
UltraslimBay. If you don't have a CD-ROM drive in the
UltraslimBay but you do have one in the docking station, the
CDROM icon is assigned to the CD-ROM drive. If you have
CD-ROM drives in both the UltraslimBay and the docking station,
the icon is assigned to the CD-ROM drive in the UltraslimBay.
Chapter 1. Getting familiar with your computer 23
To Next Page
Loading...
