Backing up your system
7
Click CDROM.
8
Click OK.
9
Click Exit.
The startable CD-ROM function is enabled.
10
Click Restart and then OK.
The computer restarts.
11
Follow the instructions on the screen.
12
When a completion message appears, remove the
Recovery CD from the CD-ROM or DVD-ROM drive.
13
Power off the computer.
14
Power on your computer while pressing and holding the
F1 key.
Hold the F1 key until the “Easy-Setup” window appears.
15
Click Start up.
16
Click Power-on.
17
Click Reset.
18
Set the startup device and then click OK.
19
Click Exit.
20
Click Restart and then OK.
Your computer restarts with the preinstalled configuration.
Chapter 1. Getting familiar with your computer 33
To Next Page
Loading...
