IBM ThinkPad 600X - Page 94

Attaching an external monitor
9 Click Yes to restart the computer.
10 Open the “Display Properties” window again by
double-clicking on Display in the Control Panel.
11 Select the Settings tab.
An image of two monitors assigned with numbers appears.
12 Click the Monitor-2 icon (for the secondary display,
either the CRT or the TV).
13 Click Yes to enable monitor 2.
14 Click the Monitor-1 icon (for the primary display, the
LCD).
15 Select the color depth and the resolution of the primary
display.
16 Click the Monitor-2 icon (for the secondary display, the
CRT or TV).
17 Select the color depth and the resolution of the
secondary display.
18 Set the relative position of the each monitor by dragging
its icon.
19 Click OK to apply the changes.
You can set the monitors in any relative position, but
their icons must touch each other.
72 IBM ThinkPad 600X User's Reference