• Operator panel
This section describes the operator panel of the TS3500 Tape Library.
Parent topic: Managing the TS3500 Tape Library
Related reference
Components of the library
Library frame
This section describes the library frames of the TS3500 Tape Library.
The library frame is the basic building block for the TS3500 Tape Library.
A base frame is:
• Models L32, L52, and L53 for LTO Ultrium tape media
• Models L22 and L23 for 3592 tape media
An expansion frame is:
• Models D32, D52, D53, and S54 for LTO Ultrium tape media
• Models D22, D23, and S24 for 3592 tape media
A high availability frame (contains dual accessor) is:
• Model HA1
Base and expansion frame models Lxx and Dxx contain a rail assembly, cartridge storage
slots, and 12 drive slots. The HD expansion frame models Sxx contain a rail assembly and
cartridge storage slots. These storage-only models do not contain drive slots. The base
frame also includes:
• Cartridge accessor
• Accessor controller
• One upper input/output (I/O) station with 16 storage slots for cartridges
• One optional lower I/O station with 16 storage slots for cartridges
Note: The lower I/O station is optional for libraries that use only one type of media and
required for libraries that use both 3592 Tape Drives and LTO Ultrium Tape Drives. In a
To Next Page
Loading...
Need help?
General