IBM TS3500 User Manual

Use one of the following methods to determine how many storage slots are in use in the
TS3500 Tape Library.
• Using the Web to determine the status of storage slots
Complete this task to determine storage slot status using the Web.
• Using the operator panel to determine the status of storage slots
Complete this task to determine the status of storage slots using the operator panel.
• Using SNMP to determine the status of storage slots
Complete this task to determine the status of storage slots using SNMP.
Parent topic: Determining the status of components in the library
Determining the location of cartridges
This section introduces three ways to determine the location of cartridges.
To determine the location of any tape cartridge in the TS3500 Tape Library, use one of the
following methods.
Note: You can locate a data cartridge by specifying its volume serial (VOLSER) number in
the Tape Library Specialist Web interface. This function is not available from the operator
panel.
• Using the Web to determine the location of cartridges
Complete this task to determine the cartridge location using the Web.
• Using the operator panel to determine the location of cartridges
Complete this task to determine cartridge location using the operator panel.
• Using SNMP to determine the location of cartridges
Complete this task to determine cartridge location using SNMP.
Parent topic: Determining the status of components in the library
Using the Web to view capacity utilization of the library
Complete this task to use the Web to view capacity utilization of the library.

IBM TS3500 Specifications

General

Brand	IBM
Model	TS3500
Category	Storage
Language	English