12.
13. [ s [ [ t ] [ u ] [ v ] [ w ] [ x ]
14.
15. [ y [ [ z ] [ 1 ] [ 2 ] [ 3 ] [ 4 ]
16.
17. [ 5 [ [ 6 ] [ 7 ] [ 8 ] [ 9 ] [ 0 ]
18.
19. [Backspace]
20.
[BACK] [ENTER]
21. Press the first character of the password. A password may be 1 to 15 characters in
length.
22. If the password is more than one character, press the next character. The first
character is added as an asterisk to the line above the keypad. As you press each
character, the previously entered character displays as an asterisk. When you type the
last character and press ENTER, it displays not as an asterisk but as the character that
you entered.
23. When you have finished entering the password, press ENTER. The Activity panel
redisplays with the LOCK, MENU, and PAUSE buttons.
Parent topic: Operating procedures
Viewing logical library capacity
This section describes how an administrator can use the Web to view the assigned and
maximum cartridge capacities of logical libraries in a TS3500 Tape Library.
About this task
To view the assigned and maximum cartridge capacities of logical libraries in the TS3500
Tape Library, perform the following steps:
Procedure
1. From the Work Items navigation pane, select Library —> Logical Libraries. The
Logical Libraries screen displays.
To Next Page
Loading...
