Capacity of Model L52, D52, L53, D53, and S54 Frames
High Density Capacity On Demand
This section describes the High Density Capacity on Demand features for the TS3500 Tape
Library.
The HD Capacity on Demand feature codes provides a license key that let you enable
additional storage slots in HD frames.
In the TS3500 Tape Library, the physical capacity, or total storage slots, is comprised of
licensed and unlicensed capacity. When the number of assigned cartridges within a library
reaches the licensed capacity, additional inserted cartridges are not assignable to a logical
library until one of the following actions occurs:
• A cartridge is removed
• A CoD feature is purchased
• Additional slots or frames are added to the library
The capacity utilization of the library can be monitored through the Tape Library Web
specialist.
The initial (base) capacity for Model S24 is 600 slots and for Model S54 is 660 slots.
Additional capacity for Models S24 and S54 can be purchased with the High Density
Capacity on Demand (HD CoD) features that provide a license key to non-disruptively
increase the licensed capacity. Unlike other Capacity on Demand features, the HD CoD
feature allows the additional licensed capacity to be used in any HD frame in the library
string.
Feature code 1645 adds 400 slots of capacity to Model S24. Feature code 1646 adds 660
slots of capacity to Model S54.
To determine the quantity of LTO Ultrium tape cartridges and 3592 tape cartridges that the
library supports, see Frame capacity.
Parent topic: Increasing capacity
Related concepts
High density technology
Web interface
To Next Page
Loading...
