• To create a password for the first time, enter the password twice.
• To change a password, enter the new password twice.
6. From the Select Action drop-down box, select Apply, then select Go. A confirmation
message displays.
7. Select Close.
Parent topic: Operating procedures
Locking or unlocking the operator panel
For Models L23 and L53, this section describes how to lock the operator panel on the
TS3500 Tape Library. It also tells how to unlock the operator panel by entering a password.
Before you begin
Note: Before you lock or unlock the operator panel, an administrator or superuser must
enable security for it (see Enabling or disabling security for the operator panel).
About this task
To lock the operator panel, on the Activity screen, press the LOCK button. The screen
refreshes and the UNLOCK button displays.
To unlock the operator panel, perform the following steps:
Procedure
1. On the Activity screen, press the UNLOCK button. The Password Entry screen
displays. The screen initially displays without any asterisks or characters in the line
above the keypad.
2. Password Entry Panel 0156
3.
4. Enter password:
5. **************p
6.
7. [ a [ [ b ] [ c ] [ d ] [ e ] [ f ]
8.
9. [ g [ [ h ] [ i ] [ j ] [ k ] [ l ]
10.
11. [ m [ [ n ] [ o ] [ p ] [ q ] [ r ]
To Next Page
Loading...
Need help?
General