• Removing a data cartridge from a drive in the library
This section describes how to remove a data cartridge from an LTO Ultrium or 3592
tape drive in the TS3500 Tape Library.
• Removing data cartridges from an HD slot in the library
This section describes how to remove data cartridges from an HD slot in the TS3500
Tape Library.
• Automatic cleaning
This topic describes automatic cleaning of tape drives in the TS3500 Tape Library.
• Inserting a cleaning cartridge into the library
This section introduces methods to insert a cleaning cartridge into the TS3500 Tape
Library.
• Performing manual cleaning of drives in the library
This section introduces two ways that you can perform manual cleaning of drives in the
library.
• Removing a cleaning cartridge from the library
This section introduces two ways to remove a cleaning cartridge from the TS3500 Tape
Library.
• Initializing a tape's volume serial (VOLSER) number
This section provides the procedure to ensure that the volume serial (VOLSER) number
on a tape cartridge's bar code label matches the VOLSER written to the tape.
• Assigning a volume serial (VOLSER) number to a tape with an unknown
VOLSER
This section provides the procedure to use the Web interface to assign a volume serial
number (VOLSER) to a selected cartridge whose volume serial number is unknown.
• Enabling bar code compatibility
Complete this task to enable bar code compatibility to allow the TS3500 Tape Library to
read Silo-style bar code labels.
• Enabling or disabling security for the operator panel
For Models L23 and L53, this section describes how to provide security for the operator
panel of the TS3500 Tape Library.
• Locking or unlocking the operator panel
For Models L23 and L53, this section describes how to lock the operator panel on the
TS3500 Tape Library. It also tells how to unlock the operator panel by entering a
password.
To Next Page
Loading...
Need help?
General
