• Enabling and disabling the SMI-S agent
This topic provides instructions for users to view and change the status of the Storage
Management Initiative Specification (SMI-S) Agent on the TS3500 Tape Library.
• Determining usage of library components
This section introduces procedures for determining usage for the accessor, drive, or
cleaning cartridge in the TS3500 Tape Library.
• Accessing vital product data for library components
This section introduces how to access vital product data (VPD) for the TS3500 Tape
Library, its drives, or its node cards. It also introduces how to access the serial
numbers of drives in the library.
• Accessing logs for the library
Complete this task to access logs for the library using the Web.
• Accessing enhanced data gathering and reporting files
The topics in this section introduce four enhanced methods by which the TS3500 Tape
Library gathers data and reports files.
• Viewing the library error log
This section describes how to view the library error log for the TS3500 Tape Library.
• Updating firmware for the library
This section introduces ways to update library firmware for the TS3500 Tape Library.
• Accessing logs for drives or saving a drive dump
This section describes how to access logs for drives in the TS3500 Tape Library and
how to save those drive dumps.
• Viewing a drive error log
This section describes how to view one or more error logs for tape drives in the TS3500
Tape Library. You can view logs for 3592 or Ultrium tape drives.
• Updating drive firmware
This section introduces ways to update firmware for tape drives in the TS3500 Tape
Library.
• Adjusting the scanner speed
This section gives instructions for adjusting the speed at which the scanner, a laser
device in the TS3500 Tape Library, reads bar code labels.
• Performing a remote drive power cycle
This section describes how to conduct a power cycle on the TS3500 Tape Library from a
remote location.
To Next Page
Loading...
