IBM TS4300 3555 User Manual

Conguration Change events
Table 37. Conguration Change events
Event Code Message Text and Description
8000 The conguration of a drive changed.
8001 The drive was added or removed from the system.
8002 A logical library was added/removed or changed.
8003 I/O station was enabled/disabled.
8004 Drive rmware changed due to rmware upgrade.
8005 Hostname/domain name changed.
8006 Email conguration settings changed.
8007 Date/time format changed.
8009 Time zone conguration changed.
8011 Network conguration changed.
8012 Expansion Module upgraded.
8013 NTP time server settings changed.
8014 The SSH Access was enabled/disabled.
8016 Library reset default settings started by user.
8017 Library Firmware changed.
8018 The Unlabeled Cartridge Support conguration changed.
8019 Accessor rmware version upgraded.
8022 Management GUI/Operator Panel Timeout conguration changed.
8024 I/O station/Magazine access control conguration changed.
8026 Accessor change detected.
8029 The SNMP conguration changed.
8030 An SNMP target was added.
8031 An SNMP target was deleted.
8033 The Operator Panel module was changed.
8034 Manual Drive reset executed.
8036 New chassis detected.
8037 Chassis was removed.
8040 LDAP Server was added.
8041 LDAP Server was modied.
8042 LDAP Server was deleted.
8043 LDAP User was added.
8044 LDAP User was modied.
8045 LDAP User was deleted.
Chapter 5. Troubleshooting 105

IBM TS4300 3555 Specifications

General

Maximum Number of Drives	2
Encryption	Yes
Product Type	Tape Library
Power Supply	Redundant power supplies
Drive Type	LTO-6
Max Capacity (LTO-6)	192 TB (compressed)
Weight	Approximately 85 lbs
Operating Temperature	10°C to 35°C
Interface	Fibre Channel, SAS
Host Interface	Fibre Channel, SAS