To Next Page

To Previous Page

Chapter 4. Managing

Four user roles are described, and each user role has its specic functions.

• Administrator - This role provides access to the administrator functions on the Management GUI.

There is a default administrator password adm001 for the rst login. The administrator password can be

changed on the Users page

• Monitor - This role allows access to library status information and does not allow access to

conguration, maintenance, or operation features. Setting a user password restricts access to status

information to only those users who know the user password. The user password can be set or changed

by the Administrator.

• Superuser - This role has same access rights as the Administrator role, except the ability to access the

Users and Remote Authentication pages. In addition, it is possible to do cartridge moves and open

magazines and I/O Stations. The Superuser password can be set or changed by the Administrator.

• Service - This role provides access to the service functions on the Management GUI. The service

password can be changed by the Administrator on the Users page.

Note: Monitor, Superuser, and Service user IDs must be enabled by the library administrator. These

accounts are disabled by default.

The Management GUI

With the Management graphical user interface (GUI), you can monitor, congure, and operate most library

functions from a web browser.

When possible, it is recommended that the Management GUI be used as the primary library interface. The

web interface provides access to more features, includes online help, and is easier to use.

Before the Management GUI can be used, you must log in and congure the library network settings with

the Operator Panel. This action can be done during Initial Setup. See “The Initial Setup process” on page

55.

Logging in with the Management GUI

1. Open a supported web browser and enter the IP address of the library in the browser’s address bar.

2. Type in the user name (administrator or other administrator-created user) and the password. Click

Note: For initial login, type administrator and the password: adm001. You must change the

password after the initial login.

Note: Only one person (on Operator Panel or Management GUI) can be logged in to the library at a time.

Any time that you try to log in and another person is already logged in, a dialog box appears, asking if you

want to log off the other user.

The Library main screen on the Management GUI

The library main screen is organized into the following regions:

IBM TS4300 3555 User Manual

Questions and Answers: