Icom IC-440N - Available Options; Microphone and Speaker Options

46
10
SPECIFICATIONS AND OPTIONS
Specifi cations ■
Receiver (Continued) D
[RX (450.000–520.000 MHz)] (Except CB (476.425–477.4125
MHz))
• Sensitivity (12 dB SINAD) : 0.25 µV typical
• Hum and noise : 45 dB typical
•
Conducted spurious radiation : Less than –57 dBm
(9 kHz–1.0 GHz)
Less than –47 dBm
(1.0 GHz–4.0 GHz)
• Audio frequency response : +2 dB to –8 dB of 6 dB/octave from
300 Hz to 2550 Hz
All stated specifi cations are subject to change without notice or
obligation.
Options ■
Microphone D
• HM-182 HAND MICROPHONE
Wired remote control microphone with key backlight. The same mi-
crophone that is supplied with the transceiver.
• OPC-647 EXTENSION CABLE
2.5 m microphone extension cable. Same as supplied with the
transceiver.
Speaker D
• SP-22 EXTERNAL SPEAKER
Compact and easy-to-install.
Cloning software D
• CS-440N CLONING SOFTWARE + OPC-1122U USB CLONING CABLE
Provides quick and easy programming items, such as set mode
contents, zone type, etc. via PC’s USB terminal.